Sharper Image 8291 SI User Manual

Sharper Image Razor Scooter (Wheel-eSeries) TeardownThis teardown guide is for any scooter owner who needs to change out a part or just wantsto learn

Step 14Remove the spring from the innerworkings of the pivotingmechanism with the needle nosepiers.To remove the spring: First, pull onthe visible ho

To reassemble your device, follow these instructions in reverse order.This document was last generated on 2015-05-10 09:39:25 AM.Step 16The teardown i

TOOLS:Hammer (1)Channellock Groove Joint Pliers (1)Flathead Screwdriver (1)For pryingLarge Needle Nose Pliers (1)Nine Piece Hex Key Set (1)Snap Ring P

Step 1 — Razor ScooterIn order to conduct this teardownyou will need (depicted from left toright):1 Hammer1 Pair of Channel Lock Pliers1 Flathead S

Step 3 Take the top of the scooter and open the handlebar lock to expose the small screwunderneath. (Picture 1)Using a 3mm allen key unscrew the si

Step 5 Moving down the remaining scooter shaft, use a 5mm allen key to remove the lowerretaining ring. (Picture 1)Now remove the remaining scooter sh

Step 6 Using your hand unscrew the first nut on the axle. (Picture 1)Note: This is the jam-nut used to stop the axle from falling apart.Now using th

Step 8 There will also be a bearing on the axle itself which can also be easily slid off. (Picture 1)Now that the axle is free the front wheel can ea

Step 10 The brake mechanism is attached to the base by a steel pin. This pin is difficult to remove,but would be possible with a large press. (Picture

Step 12Remove the black plastic pieceindicated in the picture.Hint: Use the screwdriver to getunder one of the flanges. It shouldcome off very easily